Style: Seasons Flooring Care and Cleaning
Immediately After Installation
Protect and do not disturb the sealed seams for at least 48 hours. Keep traffic to a minimum on the entire surface to allow the adhesive to harden. Do not place furniture on the floor until the adhesive has had adequate time to dry.
Always move heavy furniture and appliances with care to avoid gouging or tearing the floor. Lay plywood panels on the floor and slide the heavy objects on the panels.
Allow 48 hours for the seam sealer or the adhesive to totally dry, then damp mop your floor to remove any dirt that may have been tracked in during installation.
Regular Maintenance
Sweep or vacuum regularly to remove dirt. Using a vacuum with a roller brush is best for removing trapped dirt from the texture of Seasons Flooring.
Wipe up spills promptly to avoid stains
Wash your floor as needed with a mop and warm water. For a more through cleaning use soft brushes. Clean flooring with a neutral solution or a slightly alkaline solution by rubbing with a soft brush. Rinse with water after alkaline solution is used.
Do not use dishwashing liquids or detergent soap cleaners. They can leave a sticky residue, which attracts soil and causes a reduction of gloss.
How to Treat Stains & Spills
Stains and spills such as acids, alkalis, blood, catsup, mustard, cleaners, strong soaps, dye, dye markings, food, candy, fruit and fruit juices, grass, iodine, rust, urine.
Blot up excess at once
Rub lightly with a cloth dipped in mineral spirits
If paint is dried, gently peel it from the floor
Clean area with water
Stains that won't wipe up such as adhesives, asphalt, chewing gum, oil, grease, candle wax, tar.
Remove excess with a dull kitchen knife
Rub lightly with mineral spirits on a clean cloth
Clean area with water